Package Contents: Main unit (LinkStation) 1 LinkStation Base Plate 1 Base Rubber Feet 4 Ethernet Cable 1 Power Cord
2Step 1: Connect your CablesPlug LinkStation’s power cord into a power outlet. Then, plug the included Ethernet Cable into the Ethernet port on the b
3Check the LINK/ACT light on the front of the LinkStation. If it is lit, then LinkStation is connected properly; please turn to Page 4 to continue se
4Insert the LinkNavigator CD into the PC’s CD-ROM drive. Depending on the PC’s confi guration, the EasySetup program may launch. If it does not automa
5This part of the program changes LinkStation’s IP Address. Check the box that states ‘Acquire IP Address Automatically’. This will give LinkStation
6The LinkStation name will be required to access LinkStation. A friendly, easy name is recommended. Enter a suitable name in the ‘LinkStation Name’
7Accessing LinkStation data is performed using the following steps:LinkStation’s ‘Root Directory’ will appear. You will see all of the confi gured sha
8Technical Specifi cationsLAN Standards: IEEE 802.3u 100BASE-TX; IEEE 802.3 10BASE-TTransmission Types: 1000Mbps/100Mbps/10Mbps;(1000BASE-T) 8B1Q4+PAM5
9Buffalo Technology customers can obtain technical support using the following information: • Online Help: Available from www.buffalotech.com.
Comments to this Manuals