Buffalo-technology WMR-G54 User Manual

54Mbps/11Mbps Wireless ADSL Modem Router WMR-G54 User’s Guide

2. In the PPP Username and Password page, enter the user name and password supplied by your ISP in PPP Username and PPP Password fields. 3. Chec

 Allows only one PC on the LAN  The public IP address assigned by the remote using the PPP/IPCP protocol is actually not used on the WAN PPP inter

7. The WAN Setup page will appear. Click the Save/Reboot button. The router will reboot automatically with the new settings in effect. 8. Close

IP over ATM (IPoA) 1. Select the IP over ATM (IPoA) radio button and scroll down to select the appropriate Encapsulation Mode. There are two encaps

3. The Network Address Translation Settings page will appear. If you want to enable the NAT function, check the box Enable NAT. If NAT is enabled,

8. The WAN Setup – Summary page displays a summary of all WAN setting profiles. Click the Save button to save all the settings. 9. The WAN Setup

2. Check the box Enable Bridge Service. Enter a desired name in the Service Name field. It is used to identify the service. Then click the Next but

4. The WAN Setup page will appear. Click the Save/Reboot button. The router will reboot automatically with the new settings in effect. 5. Close

IV. Configure Wireless Connectivity 1. Click the Wireless tab on the left frame. A Wireless - Basic page will appear on the right frame. Check the bo

Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test m

2

Buffalo Technology Europe Buffalo Technology UK 176, Buckingham Avenue Slough, Berkshire, SL1 4RD United Kingdom Tel. +44 (0) 1753 555000 Fax. +44 (

Table of Contents Introduction 3 A Look at the Hardware 3 Front Panel 4 Back Panel 4 Hardware Installation 5 Configu

following table defines the behavior for each LED: LED Represents Activity / Status Power Power The Power LED will light up when the device is p

cable to the USB port and connect the other end to the computer. Reset Use an object, such as a stretched paper clip, to press the button for at leas

For Windows 2000/Windows XP 1. Right-click on My Network Places icon on the desktop and then click Properties in menu. 2. Double-click Local Area Con

Internet Service Provider (ISP). The ADSL Modem Router can be configured with your web browser. The product provides a very easy and user-friendly in

II. Quick Setup The Quick Setup will guide you through the steps necessary to configure your DSL Router. III. Configure WAN (DSL) Connectivity 1.

UBR With PCR, CBR, Non Realtime VBR, and Realtime VBR. 4. A Connection Type page will appear. There are several ways for the device to have a publi