Buffalo-technology 54MBPS BRIDGE BASE STATION WLA-G54 User Manual download pdf (Page 6)

This completes the basic AirStation Configuration.To change advanced settings

consult the Buffalo Support Web Site:

http://www.buffalotech.com/wireless/support.

Connect the AirStation to your existing LAN

Once configuration is complete, connect the AirStation to your existing Local Area

Network. Plug the provided 7ft. Ethernet cable into any one of the four 10/100M

Ethernet ports on the AirStation 54Mbps Bridge Base Station and plug the

other end into an Ethernet hub or switch on your Local Area Network.

The LAN or Wired MAC address is the

default ESS-ID (SSID) of the AirStation.The

LAN MAC address is located on the rear

of the AirStation clearly labeled next to

the 4-port switch.

The Wireless MAC address of the

AirStation is used for WDS functionality.

MAC Address and SSID

Once the AirStation is connected to the existing LAN, users accessing the

LAN through the AirStation must configure the computer’s TCP/IP Settings to

match your existing LAN.

Contact your network administrator if your computer requires a static IP

Address or if using DHCP Services.

1 2 3 4 5 6 7 8

No comments

Buffalo-technology 54MBPS BRIDGE BASE STATION WLA-G54 User Manual Page 6